2008年10月17日 星期五

計網作業二

計網作業二(老爺偷改版)
  1. Use Wireshark to analyze the packets sent from your NIC. Determine the manufacturer according to its OUI.
  2. Save the frames you captures in files. Check the list of all Ethernet frame types in RFC 5342 (BCP 0141). How many different frame types did you observe in your dormitory and NCNU computer classrooms, respectively?


計網作業二(舊版)
  1. Find a list of all Ethernet frame types.
    Hint: Read the document RFC 5342 (BCP 0141)
    Some Ethertypes Specified by the IETF

    0x0800 Internet Protocol Version 4 (IPv4)
    0x0806 Address Resolution Protocol (ARP)
    0x0808 Frame Relay ARP
    0x880B Point-to-Point Tunneling Protocol (PPTP)
    0x880C General Switch Management Protocol (GSMP)
    0x8035 Reverse Address Resolution Protocol (RARP)
    0x86DD Internet Protocol Version 6 (IPv6)
    0x8847 MPLS
    0x8848 MPLS with upstream-assigned label
    0x8861 Multicast Channel Allocation Protocol (MCAP)
    0x8863 PPP over Ethernet (PPPoE) Discovery Stage
    0x8864 PPP over Ethernet (PPPoE) Session Stage

    Some IEEE 802 Ethertypes

    0x8100 IEEE Std 802.1Q - Customer VLAN Tag Type (C-Tag, formerly
    called the Q-Tag)
    0x8808 IEEE Std 802.3 - Ethernet Passive Optical Network (EPON)
    0x888E IEEE Std 802.1X - Port-based network access control
    0x88A8 IEEE Std 802.1Q - Service VLAN tag identifier (S-Tag)
    0x88B5 IEEE Std 802 - Local Experimental Ethertype
    0x88B6 IEEE Std 802 - Local Experimental Ethertype
    0x88B7 IEEE Std 802 - OUI Extended Ethertype
    0x88C7 IEEE Std 802.11i - Pre-Authentication
    0x88CC IEEE Std 802.1AB - Link Layer Discovery Protocol (LLDP)
    0x88E5 IEEE Std 802.1AE - Media Access Control Security
    0x88F5 IEEE Std 802.1ak - Multiple VLAN Registration Protocol
    (MVRP)
    0x88F6 IEEE Std 802.1Q - Multiple Multicast Registration
    Protocol (MMRP)
    0x890D IEEE 802.11r - Fast Roaming Remote Request

  2. Use Wireshark to analyze the packets sent from your NIC. Determine the manufacturer according to its OUI.

作業繳交方式:

請在工作站上用mail指令,標題標明"[CN HW2] 94321001",將 source code寄到"cn-ta@voip.edu.tw" 這個E-mail address.
e.g. mail -s "[CN HW2] 94321001" cn-ta@voip.edu.tw < echoserver.c
註:學號請填自己的,不要寫別人的。

沒有留言: